This intricate wire-wrapped pendant showcases an elegant flow of curves and detailed wirework, complete with sea glass accents. Here’s a guide to help you create a similar Sea Glass Heart Pendant:

This intricate wire-wrapped pendant showcases an elegant flow of curves and detailed wirework, complete with sea glass accents. Here’s a guide to help you create a similar Sea Glass Heart Pendant:

Materials Needed:

1. Wire:
   • 20-gauge for the frame structure
   • 26-gauge for detailed wrapping
2. Sea glass pieces:
   • Green piece for top
   • Seafoam/yellow-green for middle
   • Peachy-pink for bottom
3. Jewelry tools:
   • Round-nose pliers
   • Chain-nose pliers
   • Wire cutters
   • Nylon jaw pliers (optional)
4. Polishing cloth

Step-by-Step Instructions: Step 1: Create the Heart Frame

1. Cut base wire:
   • Cut a piece of 20-gauge wire about 15-18 inches long
2. Shape the heart:
   • Form the basic heart shape using round-nose pliers
   • Create a sturdy outline that will hold the sea glass pieces
3. Reinforce structure:
   • Add supporting wire across the middle for stability

Step 2: Create Compartments

1. Divide the space:
   • Section the heart into three areas to hold each piece of sea glass
2. Add support wires:
   • Create curved supports that will cradle each piece
3. Secure joints:
   • Wrap connection points with 26-gauge wire

Step 3: Set the Sea Glass

1. Position pieces:
   • Place green piece at top
   • Seafoam/yellow-green in middle
   • Peachy-pink at bottom
2. Secure each piece:
   • Carefully wrap with 26-gauge wire
   • Ensure pieces are held firmly but not too tight

Step 4: Add Decorative Elements

1. Create swirls:
   • Add flowing curves and spiral details
   • Form small decorative loops throughout
2. Balance the design:
   • Ensure symmetrical placement of decorative elements
   • Fill empty spaces with delicate wire work

Step 5: Finish the Pendant

1. Form the bail:
   • Create a sturdy bail at top for chain
2. Final wrapping:
   • Secure all loose ends
   • Add additional coils for stability
3. Clean up:
   • Tuck in any sharp wire ends
   • Polish wire to desired finish

Final Touches:

1. Check security:
   • Ensure all sea glass pieces are firmly held
2. Add chain:
   • Thread onto favorite chain or cord

Your Sea Glass Heart Pendant is ready to wear! Let me know if you need guidance with any of the steps or variations.